Bathroom remodeling
Bathroom Remodeling in Riverside, CA
Riverside Kitchen & Bath Remodeling is Riverside County's trusted bathroom remodeling specialist, specializing in tub-to-shower conversions, tiled walk-in shower construction, and full bathroom gut renovations. We offer custom shower pan construction and frameless glass enclosure fitting.
- Licensed, insured & bonded
- Itemized written estimates
- Permits pulled and inspections scheduled
- Riverside & the Inland Empire
Request a Free Estimate
Or call (951) 589-3364. Calls only, we do not receive text messages.
Thank you. We will call you back to set a measure date.
Our team provides sub-tile waterproofing and pressure-balancing valve installation, delivering durable, low-maintenance bathrooms for homes and tailored layouts for primary suites, guest baths and powder rooms alike. Backed by a current California contractor license and general liability insurance, we handle everything from a single vanity replacement to a studs-out primary suite rebuild.
From sloping a mortar bed toward the drain and bonding a waterproof membrane over it to hanging the final piece of trim, our team handles every detail. Serving Riverside and neighboring communities including Rubidoux, Moreno Valley and Corona, we keep the schedule tight and deliver work that still looks right five winters later.
Get a free estimate on your Riverside bathroom remodel. Call (951) 589-3364 and we will walk the room, measure it, and hand you a written scope with real numbers.
Bathroom Remodeling Services We Offer in Riverside
The type of room sets the budget before a single tile is picked. A powder room off a Wood Streets hallway and a 100 sq ft primary bath in Canyon Crest are different jobs with different trades on site.
| Bathroom type | What the job usually includes | Typical range |
|---|---|---|
| Half bath or powder room | Toilet, sink, floor, lighting, no wet area | $4,500 to $10,000 |
| Small bath under 50 sq ft | Full demo, tub or shower, vanity, tile | $6,000 to $15,000 |
| Guest or hall bath | Full fixture set, tub-shower or stall, storage | $8,000 to $22,000 |
| Standard primary bath, about 100 sq ft | Double vanity, separate tub and shower, mid-grade finishes | $15,000 to $30,000 |
| Luxury primary suite, full gut | Layout change, stone, spa systems | $30,000 to $80,000 and up |
Those are honest market ranges, not a quote. Your number moves with the finish level, whether plumbing or walls relocate, and the condition of what is behind the tile.
The Trades a Bathroom Remodel Actually Involves
A bathroom is the densest room in a house. Demolition, rough plumbing, electrical, framing, waterproofing, tile setting, glass and finish carpentry all land inside 40 to 120 square feet, in sequence, each one passing before the next starts.
Electrical is not detail work here. Ground-fault circuit interrupter protection is required in US bathrooms, and fixture connections are made permanent to cut shock risk. Ventilation ducts to the outside of the building. Plumbing is where budgets move fastest: leaving the toilet, tub and vanity in their existing positions is a different project from moving them, and relocation adds roughly $3,000 to $10,000 over a same-footprint remodel.
See the Standard of Finish
BeforeAfterDrag the handle across. The same room, same camera position, before demolition and after completion.
We show you comparable work on homes like yours before anything is signed, so you are judging the finish rather than the photography.
Request a Free EstimateWaterproofing Is What Separates a Finished Bath From a Callback
Tile is not waterproof. Grout and tile-setting materials are porous, so the assembly underneath has to carry the water. Wet areas need multiple layers: a membrane over walls and floor beneath the tile, a shower pan under the floor tile, and a gradient that moves water to the drain instead of holding it at the perimeter.
Large-format tile gives better water defense than small mosaic because there is less grout line per square foot. Drain choice matters too. A center drain needs the pan sloped from four directions, while a linear drain lets the floor fall in one plane, which is what makes curbless entries work at all.
Riverside water is hard, and in a city that sees 9.39 inches of rain a year the mineral load shows up fast. Calcium and magnesium deposits clog shower heads, cut flow, change the spray pattern and haze glass. That is maintenance, not a defect, and it is why we specify valves and heads that can be serviced and descaled rather than sealed units that get replaced.
How the Process Works
| Stage | What happens | Typical duration |
|---|---|---|
| Design and selections | Measure, layout, fixture and tile selections, written scope | 1 to 2 weeks |
| Permits | Plans submitted to the City of Riverside where required | Varies by scope |
| Demolition and rough-in | Tear-out, framing changes, plumbing and electrical rough | 3 to 6 days |
| Waterproofing and tile | Pan, membrane, inspection, wall and floor tile, grout | 5 to 10 days |
| Fixtures and finish | Vanity, toilet, valves, glass, trim, punch list | 3 to 6 days |
Most single-bathroom projects run two to four weeks on site once materials are in hand. Custom glass and stone slabs are the long poles, so we order those early.
Permits, Codes and Inspections in Riverside
Remodels that move plumbing, gas or electrical, or that alter walls, generally require permits from the City of Riverside. We pull them. The waterproofing inspection is the one that protects you, because it happens while the assembly is still visible and cheap to correct.
The Decisions That Shape Your Project
Three choices set the budget more than any tile selection.
Same footprint or new layout. Keeping fixtures in place keeps the drain lines where they are. Moving a toilet means opening the floor.
Tub or no tub. In a primary bath with another full bath in the house, trading the tub for a larger shower usually buys more room than it costs. In a home's only full bath, we keep a tub.
Finish level. Installed cost runs roughly $80 to $120 per square foot for a cosmetic refresh, $180 to $280 for the mid-range work most families choose, $300 to $450 at the high end, and $500 to $800 and up for custom estate work.
Related Bathroom and Kitchen Services
Most clients start on one of these pages:
- Master bathroom remodeling at mid-grade finish levels
- Compact bathroom renovations under 50 square feet, where fixed costs dominate
- Guest and hall bath updates for the shared bath
- Powder room and half bath remodels with no wet area to waterproof
- Condo bathroom projects with HOA review and stack plumbing
- Grab bars, curbless entries and aging-in-place bathrooms
- Full wet room conversions with a sloped floor, no enclosure
If the bath is part of a larger project, our whole-kitchen renovation service runs on the same crew and schedule. The Riverside remodeling homepage covers the full range.
Areas We Serve
We work the whole city, from the pre-war housing stock in the Wood Streets, Downtown and Eastside to the newer tracts in Orangecrest, Mission Grove and Victoria, plus La Sierra, Arlanza and Magnolia Center in between. The 92501 through 92509 ZIP band is core territory, and the 60, the 91 and the 215 keep the crew moving across it.
We also take projects in Yorba Linda and Diamond Bar. We also cover Victorville and the Victor Valley.
Why Riverside Homeowners Hire Us
We are licensed in California and carry general liability coverage. Our crews are in-house for demo, waterproofing and tile, which is where failures happen. We pull permits in our name, photograph the assembly before it is covered, and hand over a written warranty with the final invoice. Our office is at Riverside, CA, and the phone is answered at call (951) 589-3364.
Frequently Asked Questions
How much does a bathroom remodel cost in Riverside?
Most full bathroom remodels here run roughly $6,000 to $30,000 depending on room size and finish level, with luxury primary suites going past that. A powder room can land near $4,500. Plumbing relocation, tile selection and what we find behind the walls move the number.
How long will my bathroom be out of service?
Two to four weeks on site for a typical single bath. Layout changes, custom glass and stone slab fabrication push it longer.
Do I need a permit to remodel my bathroom?
If plumbing, gas, electrical or walls change, generally yes. We submit to the City of Riverside and meet the inspector.
Do you serve my part of Riverside?
We cover the 92501 to 92509 ZIPs and surrounding communities including Rubidoux and Moreno Valley. Request a free written estimate with your cross streets.
Can we live in the house during the remodel?
Yes, as long as there is another usable bathroom. We set dust containment, protect the path in, and keep water shutoffs to scheduled windows.
Should I replace the tub or convert it to a shower?
If the home has another tub, converting usually gains real space and gets used more. If it is the only tub in the house, we keep one.
Are estimates free, and are you licensed and insured?
Estimates are free and written. We are licensed in California and insured at general liability coverage, with the certificate sent before work starts.
Start Your Riverside Bathroom Remodel
Call (951) 589-3364 and send the room dimensions and a few photos. We will visit, measure, talk through the tub-or-shower decision and the finish level, and put a written scope in your hands. Riverside Kitchen & Bath Remodeling, Riverside, CA.
Licensed, insured and bonded. CSLB number on request. Call (951) 589-3364 or send the form and we will call you back.
Request a Free Estimate
Or call (951) 589-3364. Calls only, we do not receive text messages.
Thank you. We will call you back to set a measure date.